EPM 7500/7600 Meter
The EPM 7500/7600 Tabular Data Screen wizard has several special features. You can use the Setup screen to change the meter configuration. Values displayed in white boxes are changeable. Some are changed by clicking on the displayed value, while others are changed by clicking on the associated scroll button. The Download and Refresh buttons on the setup screen upload and download all of the setpoints from the device.
To change setpoints at the device, first press the refresh button to upload current setpoint values from the device (otherwise the defaults are shown and used for download). Modify setpoints as desired, then press the download button to send all setpoints to the unit.
In the following pages, each of the 7500/7600 Meter’s Tabular Data Screen Wizards’ tabs will be displayed and detailed.
Metering Tab
EPM 7500/7600 Meter - Metering Data Screen
The Metering tab displays the following metered values from the EPM 7500/7600.
∙Vln A, B: n/a when Voltage Mode is DELTA
∙Vln C: n/a when Voltage Mode is DELTA or SINGLE
∙Vln Avg: n/a when Voltage Mode is DELTA
∙Vll AB
∙Vll BC, CA, and Avg: n/a when Voltage Mode is SINGLE
∙I A, B, Neutral, and Avg
PMCS Interface Toolkit | Features of Tabular Data Screen Wizards ∙ 127 |
