Tab | Button | Function |
|
|
|
Metering | Digital Input Labels | The user can enter descriptive text |
|
| (limited to 22 characters) for each |
|
| digital input. These labels are retentive. |
|
|
|
Control | Trigger Demand Report | Initiates a "current report" download to |
|
| a file after prompting the user to |
|
| confirm the requested action. Report |
|
| status is indicated during the download. |
|
| When the report is complete the path to |
|
| the new file is displayed. |
|
|
|
| Block/Unblock Reclosure | Blocks or Unblocks the recloser |
|
| remotely after confirmation by the user. |
|
| Active only if the recloser function is |
|
| available in the device. Will not unblock |
|
| reclosers blocked locally. |
|
|
|
| Open/Close Breaker | Opens or closes the breaker attached to |
|
| the device after confirmation by the |
|
| user. This button is disabled if the |
|
| relay’s breaker status input is unwired. |
|
| See the relay manual for details. |
|
|
|
Control | Reset Fault Log | Clears the device fault log record after |
|
| confirmation by the user. |
|
|
|
| Reset Event Log | Clears the device event log record after |
|
| confirmation by the user. |
|
|
|
| Disable Relay | Toggles the relay Enable/Disable |
|
| setpoint after confirmation by the user. |
|
|
|
| Group 1 - 6 | Changes the relay’s active setpoint |
|
| group to the selected value (1 – 6) after |
|
| confirmation by the user. |
|
|
|
Table 39. DFP100 Tabular data screen commands.
General notes on controls:
1.If the communications link between the device and the wizard has failed (as indicated by the "Communications failed" warning) then all Control tab command buttons will display the message "Communications Failure – please wait" in response to command requests.
2.While a warning or prompt message box is displayed by the wizard, all wizard controls such as command buttons and tab selectors are disabled.
3.A 15 second
PMCS Interface Toolkit | Features of Tabular Data Screen Wizards ∙ 187 |
