Protection Control Tab

Universal Relay - Protection Control Tab

The Protection Control tab is supported for the following devices: B30, C30, C60, D60, F30, F35, F60, G60, L60, L90, M60 and T60. The Protection Control tab provides the features described below.

Grouped Protection Settings

There are eight identical groups of protection settings in the UR - this tab provides an enable/disable status indication of selected protection elements, as well as a pushbutton to change the enable/disable status of those elements in each group. Function availability is determined by the Order Code read from the device – those functions that are not available in the connected device will be grayed out and disabled, as shown below:

Button to enable or disable the indicated function.

The label color indicates the function’s availability on the connected device: gray = not available, black = available.

Status indicator: gray = disabled, amber = enabled.

To use this tab, the user selects one of the eight settings groups for editing using the control labeled "Select Settings Group". The status of the settings in the selected group will then be displayed, and the user can enable/disable functions without affecting settings in the other seven groups. Note that the displayed group may not be

150 Features of Tabular Data Screen Wizards

PMCS Interface Toolkit

Page 156
Image 156
GE DEH-210 manual Protection Control Tab, Grouped Protection Settings