Power Quality Tab
EPM 7500/7600 Meter - Power Quality Tab
The Power Quality tab displays the following power quality values from the EPM 7500/7600.
Symmetric Components
∙Zero Sequence Phase and Magnitude for Current and Voltage
∙Positive Sequence Phase and Magnitude for Current and Voltage
∙Negative Sequence Phase and Magnitude for Current and Voltage
Disturbance Counts
∙Sag / Swell Counter
Relative Setpoints
∙Over KW Sliding Window Demand Status
∙Over Current Phase A Status
∙Over Current Phase B Status
∙Over Current Phase C Status
∙Over Voltage Unbalance Status
*Note: no color code is used for the Relative Setpoint Status.
The Power Quality tab also provides push buttons for performing the following commands:
Reset Sag Swell Disturbance Counter – Resets Sag Swell Counter. Enable/Disable Sag Swell – Enables or Disables Sag Swell Tracking.
Enable/Disable Over KW SWD – Enables or Disables Over Real Power Sliding Window Demand for Relative Setpoint Tracking.
130 ∙ Features of Tabular Data Screen Wizards | PMCS Interface Toolkit |
