565 Feeder Management Relay
| The large faceplate representation of the 565 provides the following animated |
| functions: |
|
|
Feature | Function |
|
|
Display Window | Opens the tabular data window specified during wizard configuration and sets the view to Monitoring page. |
|
|
SET POINTS | Opens the tabular data window specified during wizard configuration and sets the view to the Setup page. |
Button |
|
|
|
RESET Button | Opens the tabular data window specified during wizard configuration and sets the view to the Setup page. |
|
|
CLEAR Button | Opens the tabular data window specified during wizard configuration and sets the view to the Setup page. |
|
|
NEXT CHOICE | Opens the tabular data window specified during wizard configuration and sets the view to the Setup page. |
|
|
0 to 9 Buttons | Open the tabular data window specified during wizard configuration and set the view to the Setup page. |
|
|
HELP Button | Displays a Windows help screen for PMCS. |
|
|
ACTUAL | Brings the meter to an initial setting point and displays ACTUAL VALUES HAS NINE PAGES OF DATA. |
VALUES Button |
|
|
|
REFRESH Button | Updates the display to the current meter reading. |
|
|
STORE Button | Resets the meter at six special points in the display of values. Press STORE to toggle the response on the |
| bottom line. |
|
|
PAGE UP Button | Rotates among nine pages of parameter data. Press the key to display ACTUAL VALUES on the top line, a |
| description on the bottom, and reset to the first parameter value. The nine pages are listed in the table below. |
|
|
LINE Buttons | Rotate among parameters within a page. Certain configurations or meter values may prevent display of all |
| parameters within a page. The parameters in each page are listed in the table below. |
|
|
Panel Display | Display animation that shows the status of the 565 relay. The dark red square to the left of the label appears |
Lights | bright red to indicate an active state. The TRIP bar shows the current trip condition. Auxiliary relays 1, 2, and 3 |
| show |
| the monitored feeder breaker. The SERVICE bar is not animated. |
|
|
| Table 17. 565 Faceplate animated functions. |
100 ∙ Features of GE Large Faceplate Wizards | PMCS Interface Toolkit |
