![](/images/new-backgrounds/1299824/299824269x1.webp)
Min/Max Tab
EPM 7500/7600 Meter - Min/Max Tab
The Minimum/Maximum Values tab displays a variety of minimum and maximum values recorded by the EPM 7500/7600. Select Show Minimum or Show Maximum buttons to display either the minimum or maximum values for the displayed parameters. To reset all min/max values, select the Reset Min/Max button.
Min/Max values may be displayed for the following parameters:
Phase A, B, C, Neutral and Average Values
∙Vln A, B: n/a when Voltage Mode is DELTA
∙Vln C: n/a when Voltage Mode is DELTA or SINGLE
∙Vln Avg: n/a when Voltage Mode is DELTA
∙Vll AB; Vll BC, CA, and Avg: n/a when Voltage Mode is SINGLE
∙I A, B, Neutral, and Avg
∙I C: n/a when Voltage Mode is SINGLE
∙Total Harmonic Distortion – Voltage A, B, and C: n/a when Source is n/a.
∙Total Harmonic Distortion – Current A, B, C, and Neutral: n/a when Source is n/a.
∙K Factor A, B, C, and Neutral: n/a when Source is n/a.
Three-Phase Values
∙Vab, Vbc, Vca
∙Power Factor Lead Total: n/a when PF is Lagging
∙Power Factor Lag Total: n/a when PF is Leading
∙Voltage Unbalance
∙Frequency
PMCS Interface Toolkit | Features of Tabular Data Screen Wizards ∙ 129 |