![](/images/new-backgrounds/1299824/299824349x1.webp)
369 Motor Management Relay
Metering Tab
369 - Metering Data Screen
The Metering tab displays the following metered values from the 369 device: Actual Values for Voltage, Current, Power, Power Factor, and Frequency. These values are detailed below.
Current
∙Per phase magnitude and angle
∙Phase average
∙Ground current
∙Motor Load as a percentage of the Full Load Current rating defined in setpoints.
∙Thermal Capacity used in percent
∙Estimated time to trip
∙Current Unbalance ratio
Voltage
Voltage values are only displayed if the Metering or Backspin option is installed in the relay, and if a voltage transformer (VT) connection has been programmed in the relay.
Line - Line voltage magnitude.
Average
PMCS Interface Toolkit | Features of Tabular Data Screen Wizards ∙ 169 |