Hitachi hitachi series inverter user manual Group d, Group F, Save, Group a, Group b

			Func. code display
Group "d"			SET : Moves to data display
Func. code display
		SET
d001				0.00
V		U		ESC
d002			Func. code display
			ESC : Jumps to the next group
d104
Group "F"		ESC
Func. code display				Save
		SET
F001				50.00
V		U	SET	ESC
F002				50.01
			SET	ESC
F004			Data display	(F001 to F003)
			Data does not blink because of real time synchronizing
		ESC	SET : Saves the data in EEPROM
			and returns to func. code display.
Group "A"
			ESC : Returns to func. code display without saving data.
Func. code display
		SET
A001				00
V		U	SET	ESC
A002				01
A165			SET	ESC
		ESC	Data display
Group "b"	b001		When data is changed, the display
			starts blinking, which means that
			new data has not been activated yet.

SET	: Saves the data in EEPROM and
	returns to func. code display.
	: Cancels the data change and
ESC
	returns to func. code display.

	Press the both up and down key at the same
U	time in func. code or data display, then
	single-digit edit mode will be enabled.
V
	Refer to 2-34 for further information.

NOTE: Pressing the [ESC] key will make the display go to the top of next function group, regardless the display contents. (e.g. A021 [ESC] b001)

16