[Setting example]
After power ON, changing from 0.00 display to change the A002 (Run command source) data.
Press [ESC] key to show the function code
ESC
d001 
Data of d001 will be shown on the display after the first power ON
0.00
ESC
SET
Press [ESC] key to move on to the function group F001
F001
ESC 
Press [ESC] key Once to move on to the function group A001.
A001
U 
V 
Press Up key to change increase
function code (A001 | A002) |
Press SET key to display the data of A002
SET 
Display is solid lighting.
A002 | 02 |
ESC 
U
Press up key to increase the | V | |
data (02 01) | ||
|
SET 
01
Press SET key to set and save the data
When data is changed, the display starts blinking, which means that new data has not been activated yet.
SET 
:Fix and stores the data and moves back to the function code
ESC 
:Cancels the change and moves back to the function code
Function code dxxx are for monitor and not possible to change.
Function codes Fxxx other than F004 are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
17
