Hitachi hitachi series inverter C147, C148, C149, C150, C160, C161, C162, C163, C164, C165, C166

				Run
	Func.	Name	Description	Mode	Initialdata	Units
	Code			Edit
C147		Logic output 2 operator	Applies a logic function to calculate		00	−
			[LOG] output state,
			Three options:
			00…[LOG] = A AND B
			01…[LOG] = A OR B
			02…[LOG] = A XOR B
C148		Logic output 3 operand A	All the programmable functions		00	−
			available for logic (discrete) outputs
C149		Logic output 3 operand B			01	−
			except LOG1 to LOG3, OPO, no
C150		Logic output 3 operator	Applies a logic function to calculate		00	−
			[LOG] output state,
			Three options:
			00…[LOG] = A AND B
			01…[LOG] = A OR B
			02…[LOG] = A XOR B
C160		Input [1] response time	Sets response time of each input		1.	−
			terminal, set range:
C161		Input [2] response time			1.	−
			0 (x 2 [ms]) to 200 (x 2 [ms])
C162		Input [3] response time			1.	−
			(0 to 400 [ms])
C163		Input [4] response time			1.	−
C164		Input [5] response time			1.	−
C165		Input [6] response time			1.	−
C166		Input [7] response time			1.	−
C169		Multistage speed/position	Set range is 0. to 200. (x 10ms)		0.	ms
		determination time

Input Function Summary Table – This table shows all thirty-one intelligent input functions at a glance. Detailed description of these functions, related parameters and settings, and example wiring diagrams are in “Using Intelligent Input Terminals” on page 27.

	Option	Terminal		Function Name		Description
	Code	Symbol
00		FW	FORWARD Run/Stop		ON	Inverter is in Run Mode, motor runs forward
					OFF	Inverter is in Stop Mode, motor stops
01		RV		Reverse Run/Stop	ON	Inverter is in Run Mode, motor runs reverse
					OFF	Inverter is in Stop Mode, motor stops
02		CF1		Multi-speed Select,	ON	Binary encoded speed select, Bit 0, logical 1
				Bit 0 (LSB)	OFF	Binary encoded speed select, Bit 0, logical 0
03		CF2		Multi-speed Select,	ON	Binary encoded speed select, Bit 1, logical 1
				Bit 1	OFF	Binary encoded speed select, Bit 1, logical 0
04		CF3		Multi-speed Select,	ON	Binary encoded speed select, Bit 2, logical 1
				Bit 2	OFF	Binary encoded speed select, Bit 2, logical 0
05		CF4		Multi-speed Select,	ON	Binary encoded speed select, Bit 3, logical 1
				Bit 3 (MSB)	OFF	Binary encoded speed select, Bit 3, logical 0
					ON	Inverter is in Run Mode, output to motor runs at
06		JG	Jogging			jog parameter frequency
					OFF
						Inverter is in Stop Mode
07		DB	External DC braking		ON	DC braking will be applied during deceleration
					OFF	DC braking will not be applied
				Set (select) 2nd Motor	ON	The inverter uses 2nd motor parameters for
08		SET				generating frequency output to motor
				Data	OFF	The inverter uses 1st (main) motor parameters
						for generating frequency output to motor

71