Checking Memory Installation
To verify that DIMMs are installed correctly:
1.Turn the printer on. Check that the printer control panel displays the Ready light after the printer has gone through the startup sequence. If an error message appears, a DIMM may have been incorrectly installed. See Troubleshooting Control Panel Messages.
2.Print a self test/configuration page by pressing GO and JOB CANCEL simultaneously.
3.Check the Installed Personalities and Options section on the self test/configuration page and compare it with the self test/configuration page printed before the DIMM installation.
If the amount of recognized memory has not increased:
!The DIMM may not be installed correctly (repeat the installation procedure).
!Try another DIMM slot.
!The DIMM may be defective (try a new DIMM).
EN | Appendix C Printer Memory and Expansion 149 |
