Printing Tasks

1

2

3

Note

Printing speeds may be automatically reduced when printing special-sized media.

Printing on Envelopes

CAUTION

Before you load envelopes in Tray 1, make sure they are undamaged and are not stuck together. Never use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials. For more information, see Media Specifications.

1Open Tray 1 by pulling the front cover down.

2Open the rear output bin by pulling down on the top section of the bin. Slide out the extender until it extends fully.

Note

Using the rear output bin reduces envelope curl.

3Slide the width guides on Tray 1 outward slightly wider than the media.

Continued on the next page.

EN

Chapter 2 Printing Tasks 41