HP 2200 manual Printing with the Fast Infrared Port Wireless Printing, FIR Port

Printing with the Fast Infrared Port (Wireless Printing)

The fast infrared (FIR) port is located on the lower right corner of the printer. This port is compliant with the specifications determined by the Infrared Data Association (IrDA). On the right side of the FIR port is a status light that indicates when the port is active. The FIR port transmits data at speeds of up to 4 MB per second. When the IR connection is established, the FIR status light comes on. If the connection is broken, or when the print job is complete, the FIR status light goes off.

FIR Status Light

FIR Port

To use the FIR port, you need the following:

!A computer or Personal Digital Assistant (PDA) equipped with an IrDA-compliant IR port.

!An infrared port driver that allows printing from the computer to the printer using the FIR port and the IrDA communication protocol.

!A printer driver to generate data that the printer can print.

Note	Check with your hardware or operating system manufacturer for the
	correct port driver.

24 Chapter 1 Printer Basics EN