1 |
2 |
Duplexer Area
1Slide out Tray 2 from the printer.
2Pull the green lever on the left front of the printer to open the bottom of the duplexer.
3Reach in and pull out the jammed paper.
4Push the bottom of the duplexer back up until it clicks into place.
5Slide Tray 2 back into the printer.
| Note | |
| To reset the printer and continue | |
| printing, open the top cover all | |
3 | the way and close it. | |
If the Attention light does not go out, | ||
| ||
| there is still jammed paper inside the | |
| printer. Check the paper feed, toner | |
| cartridge, and output areas for | |
| paper jams. |
4 |
5 |
|
|
EN | Chapter 4 Problem Solving | 83 |
