Loading Media into Optional 500-sheet Tray 3

1

2

3

Note

The Optional 500-sheet Tray 3 supports only A4 and letter-size paper.

1Pull the tray out of the printer and remove any paper.

2To adjust for letter-size paper, pull up on the rear stop, or to adjust for A4-size paper, push the rear paper stop down.

3For letter-size paper, move the side width guides outward as far as possible, or for A4-size paper, move the side width guides inward as far as possible.

4Add the media and make sure that it is flat in the tray. Keep the media below the hooks on the side and rear of the tray.

5Slide the tray back into the printer.

4

5

EN

Chapter 2 Printing Tasks 39