HP 72SR manual To avoid cutting the 10-inch pattern from the media, Inches apart, Advance accuracy

◆10-inch calibration — prints a 10-inch test pattern so you can verify its length with an accurate metal ruler. This is not as precise as the 34-inch calibration, but it uses less media. Measure and adjust the media advance as needed until the pattern is exactly 10 inches long.

Tip	To avoid cutting the 10-inch pattern from the media
	web, copy the marks from the 10-inch calibration to
	the long edge of a letter-size (or A4) sheet of paper.
	Then measure the transferred marks and adjust the
	media advance as needed until the marks are exactly
	10 inches apart.
Tip	Run the 34-inch or 10-inch calibration first, then run
	the stitch pattern version to fine-tune the media
	advance accuracy.

◆Input MFN — enter the Media Feed Number that was displayed after a previous media feed calibration, to return to that setting without performing the calibration again.

4-10 Manual Calibrations