HP 72SR manual AutoRecover

AutoRecover

AutoRecover runs Purge-n-Wipe automatically at the beginning of a print job, when a specified number of minutes have passed since the last Purge-n-Wipe. This function is disabled by default. Enable it only if neeed to keep jets working.

Running a Purge-n-Wipe operation before printing ensures the maximum number of working jets, but is not necessary before each print. If jets are becoming clogged or deflected, lower the AutoRecover interval. If jets are working well, increase the AutoRecover interval. Continuous printing encourages working jets and reduces the need for AutoRecover.

1.On the Front Page screen, press the  (Menu) key to enter the menu system.

2.Press the  (Menu In) key display the Calibrate Printer menu.

3.Press the ) key to highlight AutoRecover.

4.Press the  (Menu In) key.

The control panel displays the AutoRecover status (off or current interval).

5.Press , or ) to set the number of minutes since the previous Purge-n-Wipe before it will be run automatically at the start of the next print job.

To disable this function, scroll down past 1 to OFF.

6.Press ! (Proceed).

4-6 AutoRecover