10.On the Front Page screen of the control panel, press the Load Media key.

The control panel presents a list of media types. You can select a ColorSpan media from the list, or select Custom (at the end of the list) to specify a new media. The printer’s Media Wizard feature stores a set of parameters for each media type, which can be recalled and applied whenever you change media types. (See “Media Wizard” on page 3-32 for details.)

11.Select the media type you are loading, or create a new media type.

The control panel displays the current settings for the media type you chose.

Fig. 3-4. Media settings

12.Press one of the change keys to change any of the settings, print mode, or media type, or press the ! key to continue.

If you press one of the change keys, a screen appears to

allow you to change any of the settings. Then press the ! key to continue. See “Media Wizard” on page 3-32 for information about these settings.

13.Enter the length of the media roll (if it is a new roll) or the length remaining (if it is a partially used roll), and press the Enter key to continue.

To skip this step, press Esc without entering a value.

Loading Roll-Fed Media

3-17

Page 87
Image 87
HP 72SR manual Media settings