HP 72SR manual View Current Bad Jets, Clear All Bad Jets

12.When you are finished entering jet numbers, press the Esc key.

The control panel displays the head selection message again.

13.Press , and ) to select the next head number, then press ! (Proceed).

14.Repeat steps 11 through 13 for each head containing bad jets you want to clear.

15.When you are finished clearing bad jets, press (.

The control panel displays the previous menu.

View Current Bad Jets

When you select View Current Bad Jets, the control panel displays the following prompt:

Head 1:

Press Proceed to view bad jets.

16.Press , and ) to select a head number, then press ! (Proceed).

The control panel displays a message that lists the bad jets by number.

17.Press ! to return to the head selection screen.

18.Repeat steps 16 and 17 for each head you want to check for bad jets.

19.When you are finished clearing bad jets, press (.

The control panel displays the previous menu.

Clear All Bad Jets

When you select Clear All Bad Jets, the control panel dis- plays the following prompt:

Are you sure you want to clear

ALL reported bad jets?

◆Press ( to cancel this function, or

◆Press ! (Proceed). The control panel displays this message:

Do you want to clear the hard bad jets?

◆Press No to clear the soft bad jets only.

◆Press Yes to clear both the hard and soft jets.

Manual Calibrations 4-19