Table B-1. Actions and Warnings

Code, Message

Cause

What to Do

A-IS-[76 77 78 79]- Ink System Dis- abled

Ambient temp is out of range for operation for K (76), C (77), M (78), or Y (79).

Raise or lower the ambient tempera- ture until it is within operating range (see “Specifications” on page A-2).

A-IS-[80 81 82 83]- [color] Heads Not

Printheads for one or more colors do

Loaded With Ink

not have ink loaded.

Fill the affected printheads with ink. See “Set the Printhead and Camera Height” on page 5-11.

A-IS-[84 85 86 87]- [color] Ink Sensor

The ink sensor for one or more colors

Reconnect ink sensor.

Disconnected

is disconnected.

 

 

 

 

A-IS-[88 89 8A 8B] - [color] Air Sensor

The air sensor for one or more colors

Reconnect air sensor.

Disconnected

is disconnected.

 

 

 

 

A-IS-[90 91 92 93 94] - [color] Pump

The pump for one or more colors is

Reconnect pump and restart printer.

Disconnected

disconnected.

 

 

 

A-IS-[95 96 97 98 99] - [color] Float

The float for one or more colors is dis- Reconnect float and restart printer.

Disconnected

connected.

 

A-IS-100 - Excess Ink Bucket Full

The excess ink and solvent reservoir

 

below the supply reservoirs is full.

Empty and dispose of the excess ink and solvent according to local regula- tions. Check the left leg bucket and empty if necessary.

A-IS-[101 102 103 105 107 108 109 110A

The ink counting mechanism has

Replace ink counting mechanism.

110B] - Ink Counting Not Working

failed.

 

 

 

 

A-IS-104 - Ink Counting Not Working

The ink counting mechanism has

See Service menu to reset this action.

 

 

failed.

 

 

 

 

A-IS-106 - Ink Counting Not Working

The ink counting mechanism has

Check docking station cables.

 

 

failed.

 

 

 

 

A-IS-[110 110C 111 112]- Ink Counting

The ink counting mechanism has

Restart the printer. If the problem

Not Working

failed.

persists, contact your Authorized Ser-

 

 

 

vice Provider or Technical Services.

 

 

 

W-IS-[1 2 3 4] - [color] Low Ink

Ink reservoir indicated has about 250

Refill the ink reservoir soon.

 

 

ml of ink remaining.

 

 

 

 

 

W-IS-5

- Cleaning solvent low

Cleaning solvent reservoir has about

Refill the reservoir soon.

 

 

250 ml of ink remaining.

 

 

 

 

 

W-IS-6

Cleaning Solvent Missing

Cleaning Solvent profiler is not

Ensure that the cleaning fluid profiler

Profiler

detected.

is installed.

 

 

 

 

W-IS-7

Out Of Cleaning Solvent

Refill cleaning fluid reservoir.

Purging will be disabled if not

Cleaning Solvent reservoir is empty.

 

refilled.

 

 

 

 

W-IS-8

Replace Ink Filters

The ink reservoir filters need replac-

Replace the ink reservoir filters and

 

 

ing.

the cleaning solvent filter.

W-IS-9 Incorrect Cleaning Solvent

The profiler in the Cleaning Solvent

Profiler

slot is not a cleaning solvent profiler

 

or is the wrong type.

Replace the profiler with appropriate Cleaning Solvent profiler.

W-IS-[21 22 23 24 25] -

The profiler and reservoir indicated

[color] Needs Profiler and Ink

are empty.

Refill the reservoir and replace the profiler.

B-10

Diagnostics

Page 204
Image 204
HP 72SR manual IS-90 91 92 93 94 color Pump