HP 72SR manual Clear Individual Bad Jets, Enter the jet number, then press the Enter key

The control panel displays a numeric keyboard that you can use to enter the number of the bad jet.

Fig. 4-4. Numeric entry screen

5.Enter the jet number, then press the Enter key.

6.When you are finished entering jet numbers, press the Esc key.

The control panel displays the head selection message again.

7.Press , and ) to select the next head number, then press ! (Proceed).

8.Repeat steps 5 through 7 for each head containing bad jets you want to report.

9.When you are finished reporting bad jets, press (.

The control panel displays the previous menu.

Clear Individual Bad Jets

When you select Clear Individual Bad Jets, the control panel displays the following prompt:

Head 1:

Press Proceed to clear a bad jet.

10.Press , and ) to select a head number, then press ! (Proceed).

The control panel displays a numeric keyboard that you can use to enter the number of the bad jet.

11.Enter the jet number, then press the Enter key.

4-18 Manual Calibrations