HP 72SR manual Step-and-Repeat settings

To specify step-and-repeat settings for an image:

1.In the System Control interface, route a port to the Output Hold queue, or pause the Standard port.

2.Print an image to the port that is routed to the Output Hold queue or paused Standard port.

After the job has RIPed, it appears in the queue.

3.Open the queue, select a document, then double-click the document listing to open the Document Details dialog box.

The Document Details dialog box appears.

4.In the Details section, click the “Printing” radio button to display the Step-and-Repeat properties.

The Step-and-Repeat properties appear similar to this example (if they do not appear, then Step-and-Repeat is not supported on the selected printer):

Fig. 6-6. Step-and-Repeat settings

Selecting Server Options 6-11