HP 72SR manual Remove the pump cover see Fig, Install the reservoir wire rack see Fig

Off Head Supply (OHS) Assembly

25.Remove the pump cover (see Fig. 1-6).

This is necessary to access the lower mounting holes for the reservoir wire rack. The pump cover attaches to the printer with two Phillips head screws.

26.Install the reservoir wire rack (see Fig. 1-6).

Insert the top pieces, hooks pointing down, into the mount- ing holes. Then insert the bottom pieces into the mounting holes.

Reservoir rack

Pump cover

Catch tray

Fig. 1-6. Reservoir wire rack and ink catch tray

27.Reinstall the pump cover (see Fig. 1-6).

28.Attach the ink catch tray to the back of the printer with the four #3 screws (see Fig. 1-6).

1-14 Unpacking and Assembly