HP 72SR manual Printer moves the media to the proper position for printing

13.Press the ! key to continue.

The control panel displays a screen that shows the following information:

◆Media size

◆Print area

◆Right & left margins — if you enter 0 (zero), you can also specify an amount of overprint (printing past the edge of the media). This enables you to achieve an edge-to- edge printing effect without an unprinted border, espe- cially if the media is skewed or not a perfect rectangle. Protect the platen with tape or a strip of media to catch the overprinted ink.

◆Leading margin

◆Trailing margin — 6.50 inches (165 mm) minimum to allow the pinch rollers to feed the media. If you set the Trailing Margin to 0 and want to print to the trailing edge, you must attach a trailer of the same media to the trailing edge so the pinch rollers can feed the media all the way past the print zone.

14.To change the margin settings, press the Margin Settings key; otherwise, press Proceed.

The printer moves the media to the proper position for printing.

3-28 Loading Rigid Media