HP 72SR manual Use a Phillips screwdriver to loosen the filter clamp, Tighten the filter clamp

4.Use a Phillips screwdriver to loosen the filter clamp.

See Fig. 5-12 for location.

Connector

Filter

Clamp

Connector

Fig. 5-12. Filter connections

5.Unscrew the hose connectors from filter.

See Fig. 5-12 for location.

6.Remove the old filter.

7.Install the new filter into the filter clamp.

The filter’s label has an arrow that indicates the direction of flow. Install the filter with the arrow pointing up.

8.Tighten the filter clamp.

The filter should be secure, but do not overtighten the screw.

9.Connect the hoses to the top and bottom of the filter, and tighten the connectors.

10.Replace the reservoir.

11.Reconnect the tube to the reservoir, and tighten the connector.

See Fig. 5-11 for location.

12.Reconnect the level sensor cable.

See Fig. 5-11 for location.

Replace Ink Filters 5-19