HP 72SR manual Final Assembly 30. Install the vacuum reservoir see Fig

Final Assembly 30. Install the vacuum reservoir (see Fig. 1-8).

Ensure that the o-ring is in place inside the reservoir open- ing, and screw on the reservoir. Hand tighten firmly, but do not overtighten.

Fig. 1-8. Vacuum reservoir

31.Using the threading string attached to the stand leg, pull the drain tube that is connected to the left-side spittoon through the stand leg to the rear of the printer, and connect it to the left-side excess ink reservoir (see Fig. 1-9).

Fig. 1-9. Connecting the drain tube to the reservoir

1-16 Unpacking and Assembly