Klark Teknik DN9340E, DN9344E manual Building your Network Remotely, The FastNav Screen, User Guide

HELIX DN9340E/DN9344E Remote Control Software

User Guide

6WORKING WITH MULTIPLE HELIX ADDINS

6.1Building your Network Remotely

Working within ELGAR enables you to open a series of HELIX AddIns (DN9340 EQ devices) in a single show file to match your physical equaliser network. As with the physical network, the maximum number of devices that can be held in any one file is 32.

In keeping with network protocol, each HELIX AddIn must be assigned a unique network address (between 1 and 32 for the DN9340E/DN9344E). Addresses do not have to be assigned incrementally, but HELIX RCS will automatically use the lowest available address when you add-in a new DN9340 EQ Device. HELIX RCS will not allow two devices to be assigned the same address.

6.2The FastNav® Screen

To make it easier to work with multiple HELIX AddIns, a global DN9340 FastNav® screen is provided with several multi-device facilities, including:

•Switching between the devices (detailed below).

•Global channel muting (see later in this section).

•Copying settings between devices (covered in Section ￿).

•Global Graphic control of faders (covered in Section 6.4).

•Global online controls (covered in Section 7.6).

•Mixing console Solo Tracking button assignments (covered in Section 7.7).

•Function Locking for system Protection (covered in Section 7.8).

•Global memory controls (covered in Section 8).

To switch to the FastNav® screen

Click on the Fast Nav. button in any HELIX AddIn.

Or:

Click on the HelixEQ Navigation icon on the Windows Start bar (usually at the bottom of the screen).

22 of 65