HELIX DN9340E/DN9344E Remote Control Software
User Guide
3If an asterisk appears in the Valid column, the chosen solo button is already assigned to another HELIX channel; the conflicting HELIX channel will also be marked with an asterisk. Select another Solo Source and Num combination for one or other of the HELIX channels to resolve the conflict.
Hint If required, click on Reset STS to quickly clear all the current solo assignments.
To write the settings to the DN9340 unit that is currently configured for Solo Tracking
1In the System Solo Tracking Setup screen, select the DN9340 HELIX unit you wish to write to from the Target Helix Unit drop down list. The Target Helix field defaults to the Master Unit specified in the Function Lockout screen (see Section 7.8).
2Click on Write To Unit . You are warned that this will overwrite the data in the unit and are asked to confirm the action.
Note 
If the Write To Unit button is dimmed, you need to set the selected target unit online.
3Click Yes to continue or No to abort.
4Click Exit to close the screen when finished.
47 of 65
