HELIX DN9340E/DN9344E Remote Control Software
User Guide
The Ethernet Port screen (shown below) allows you to:
•Change the port name in the Port Name field.
• Select the appropriate IP address from the IP Address drop down list.
•Identify an Ethernet port, whose allocated number is shown in the Port field. This port number, not to be confused with an ELGAR ‘port’, represents the source port number in TCP connections. It is the number that identifies the channel for remote initiating connections.
Caution!
Unless instructed to do otherwise, you should not alter this field, as changing it may cause the serial connection not to work.
•Select Generic Echo Off (usually for Ethernet) or Generic Echo On (usually for serial).
41 of 65
