Konica Minolta IP-411 manual System Configuration, Default Settings

The Print Controller

System Configuration

The Konica IP-411 Print Controller is an embedded control board for the Konica 7040/7033 Copier engine and is based on an IBM compatible PC architecture that includes the following:

Intel Pentium 233 MMX CPU

PCI bus interface to 7040/7033 Copier engine

PCI bus interface to optional network board (KN-302)

Standard 32 MB 168 pin DIMM memory

IDE 8 MB Flash (standard)

IDE Hard Drive (optional HD-104)

The IP-411 embedded control board contains custom hardware and software for communicating with and controlling the print engine. The IP-411 embedded control board can be reprogrammed in the field via the Parallel Port or through the network.

Settings

Default Settings

Default Paper Size	Letter
Default Resolution	400 dpi
Default Emulation	PCL 5E
Default Printer Quality	Text Mode
Other Settings
E-RDH Print Order	Normal
Duplex	Off
Sheet Insertion	Off
Paper Thickness	Normal
Print Density	Engine default
Finisher Mode	Job Offset

The Print Controller 1-3