Printer Driver Screens
PS Driver Screens for Windows NT | Document Defaults |
Page Setup - Duplex Printing (None, Short Side, Long Side)
When there is no black dot next to [None], Duplex Printing is on and printing will be performed on both sides of each sheet. When a black dot is visible next to [None], Duplex Printing is off and printing will be performed on one side of each sheet.
In the default setting, Duplex Printing is off, as shown by the visible black dot next to None.
1 To turn Duplex Printing on, click None so that no black dot is visible.
2 Select Short Side or Long Side. Icons next to these two modes depict the output result.
•With Short Side, output pages can be read by lifting each sheet from the bottom.
•With Long Side, output pages can be read by turning pages sideways, as in a book.
To leave the Duplex setting unchanged, click Cancel.
Printer Drivers
