Lexmark 642e MFP Remove paper from, Standard output bin, Restarting job, Replace wiper, Open

Attendance messages

Message	Meaning	Action
Remove paper from	The standard output bin is full of print	Remove the stack of print media from the bin to
standard output bin	media.	clear the message and resume printing.
		Touch Continue to make the MFP recheck the
		output level in the standard output bin.
Replace all originals if	• One or more messages which	Touch Cancel Job if a scan job is processing
restarting job.	interrupted a scan job are now	when the attendance message appears. This
	cleared. Replace the original	cancels the job and clears the message.
	documents in the scanner to	Touch Scan from Automatic Document Feeder
	restart the scan job.
		if the page jam recovery is active. Scanning
	• The MFP receives a scan job;
		resumes from the ADF immediately after the
	however, there is no original
		last successfully scanned page.
	document in the ADF. Place the
		Touch Scan from flatbed if page jam recovery is
	original documents in the scanner
	to restart the scan job.	active. Scanning resumes from the flatbed
	Job level recovery is active.	immediately after the last successfully scanned
		page.
Replace jammed originals	The MFP receives a scan job;	Touch Finish job without further scanning if
if restarting job.	however, there is no original	page jam recovery is active. The job ends at the
	document in the ADF.	last successfully scanned page, but the job is
	Page level recovery is active.	not canceled. Successfully scanned pages go
		to their destination: copy, fax, e-mail, or FTP.
		Touch Restart job if job recovery is active and
		the job is restartable. The message clears. A
		new scan job containing the same parameters
		as the previous job starts.
Replace wiper	The MFP detects that the fuser wiper	1 Replace the fuser wiper.
	needs replacing.	2 Touch Continue to clear the message.
		Touch Ignore to clear the message, but at the
		next power-on, the message appears again.
Scan Document Too Long	The scan job exceeds the maximum	Note: The scanner finishes scanning current
	number of pages.	pages in the ADF, but data is lost when the job
		cancels itself after reaching the maximum
		number of pages.
		Touch Cancel Job to clear the message if the
		job is restartable.
Scanner ADF Cover Open	The scanner automatic document	The message clears when the cover is closed.
	feed cover is open.
Scanner Jam Access Cover	The scanner jam access cover is	Close the cover to clear the message.
Open	open.
Scanner registration	Scanner registration is successful.	Touch Continue to clear the message.
successfully completed
Unsupported USB device,	A device is inserted in the front USB	Remove the unsupported USB device to
please remove	port, but it is not recognized.	continue.
Unsupported USB hub,	A USB hub is inserted in the front	Remove the unsupported USB hub to continue.
please remove	USB, but it is not recognized.
1565 Emulation error,	The download emulator contained in	Download the correct download emulator
load emulation option	the firmware card does not function	version from the Lexmark Web site.
	with the MFP firmware.
	Note: The MFP automatically clears
	the message in 30 seconds and then
	disables the download emulator on
	the firmware card.
30.yy Invalid refill,	The MFP detects a refilled Lexmark	Install a new print cartridge to clear the
change cartridge	Cartridge Return Program print	message.
	cartridge.

101