Lexmark 642e MFP manual Fax Receive Settings, Mfp

Using MFP menus

Fax Receive Settings

Menu item	Purpose	Values and descriptions
Enable Fax Receive	Allows fax jobs to be received by the	On*	Fax jobs can be received.
	MFP.
		Off	Fax jobs cannot be received.
Rings to Answer	Sets number of times the MFP rings to	1–25 (3*)
	indicate an incoming fax job.
Auto Reduction	Scales an incoming fax job so it fits the	On*	Scales the incoming fax.
	size of the print media loaded in the
		Off	Does not scale the incoming fax.
	designated fax source. For more
	information, see Paper Source, which
	follows.
Paper Source	Specifies the print media source	Auto*	The print media source is
	selected to supply print media for the		automatically selected by the MFP.
	MFP to print an incoming fax.
		Tray <x>	The standard tray, Tray 1, or Tray <x>,
			which is one tray (Tray 2–Tray 5),
			based on how many optional drawers
			are installed and based on which one
			is specified as the print media source.
		MP Feeder	The multipurpose feeder is the
			specified print media source.
Duplex	Sets duplex printing (two-sided	On	The incoming fax is a duplex job.
	printing) either on or off for incoming
		Off*	The incoming fax is not a duplex job.
	fax jobs.
	This menu item appears if an optional
	duplex unit is installed or if the MFP
	model has an internal duplex unit.
Fax Footer	Prints the transmission information at	On	Select On to print the footer.
	the bottom of each page from a	Off*	Select Off to prevent the footer from
	received fax.
			printing.

Settings

56