Lexmark 642e MFP manual Ram

Using MFP menus

Menu item	Purpose	Values and descriptions
Printer Language	Specifies the default printer	PCL Emulation*	PCL emulation—Uses a PCL interpreter for
	language used to	PS Emulation	incoming host communications.
	communicate data from the		PostScript emulation—Uses a PS interpreter
	computer to the MFP.
			for incoming host communications.
	Note: This menu item is not
	available from the LCD. It is
	only available on the MFP
	Embedded Web
	Server.Setting a printer
	language as the default does
	not prevent a software
	application from sending print
	jobs that use the other
	language.
Print Area	Modifies the logical and	Normal*	Note: The Whole Page setting only affects
	physical printable area.	Fit to Page	pages printed using PCL 5 interpreter. This
	Note: This menu item is not		setting has no effect on pages printed using
		Whole Page
			the PCL XL or PostScript interpreters. If
	available from the LCD. It is
			attempting to print any data in the non-
	only available on the MFP
			printable area defined by Normal Print Area,
	Embedded Web Server.
			the MFP clips the image at the boundary
			defined by the Normal defined printable area.
Download Target	Specifies the storage location	RAM*	All downloaded resources are automatically
	for downloaded resources.		stored in printer memory (RAM).
	Storing downloaded
		Flash	All downloaded resources are automatically
	resources in flash memory is
			stored in flash memory.
	permanent storage rather
			Note: Flash appears as a menu item if a
	than the temporary storage
	that RAM provides. The		formatted, nondefective optional flash
	resources remain in the flash		memory card which is not Write or Read/Write
	memory even when the MFP		password protected is installed.
	is turned off.
	Note: This menu item is not
	available from the LCD. It is
	only available on the MFP
	Embedded Web Server.
Resource Save	Specifies what the MFP does	Off*	The MFP retains downloaded resources only
	with downloaded resources,		until memory is needed. It then deletes those
	such as fonts and macros		resources associated with the inactive printer
	stored in RAM, if the MFP		language.
	receives a job that requires
		On	The MFP retains all downloaded resources for
	more memory than is
	available.		all printer languages during language
	Note: This menu item is not		changes and MFP resets. If the MFP runs out
			of memory, 38 Memory Full appears.
	available from the LCD. It is
	only available on the MFP
	Embedded Web Server.
Banner Page	Specifies if the print job	Off*	To set to Off, clear the check box.
	should be printed as a	On	To set to On, select the check box.
	Banner Page.
	Note: This menu item is not
	available from the LCD. It is
	only available on the MFP
	Embedded Web Server.

Settings

46