Lexmark 642e MFP manual Print Settings, Finishing Menu

Using MFP menus

Menu item	Purpose	Values and descriptions
Background	Adjusts the amount of background	-4 to +4 (0*)	-4 sets Background Removal to off.
Removal	visible on a copy.		+4 sets Background Removal to the
			maximum allowed.
Contrast	Specifies the contrast used for the	0–5	Best for content has a default value, also,
	scan job. The default is dependent	Best for content*	since the value is dependent on the
	on the Content menu item. If the		Content menu item. For more information,
	Content menu item is reset from the		see Content. If Content is mono text, the
	default setting, then the default for		Contrast default value is 5. The default is 0
	Contrast is reset, also.		for items other than mono text.
			Any reset of the Content value resets the
			default of the Best for content value.
Shadow Detail	Adjusts the amount of shadow	-4 to +4 (0*)	-4 preserves the least amount of shadow
	detail visible on a copy.		detail.
			+4 preserves the most shadow detail.
Scan edge to	Specifies if the original document is	Off*
edge	scanned edge-to-edge prior to	On
	sending the scan job.

Print Settings

Print settings consist of the following menus. Click any of the menus for more information:

Finishing Menu	PCL Emulation Menu
Quality Menu	PDF Menu
Utilities Menu	HTML Menu
Setup Menu	Image Menu
PostScript Menu

Finishing Menu

Use these menu items to set the user default settings for all jobs. Printing from an application may override user default settings.

Menu item	Purpose	Values and descriptions
Duplex	Sets duplex (two-sided) printing as	Off*	Prints on one side of the print media.
	the default for all print jobs.
		On	Prints on both sides of the print media.
	Note: This menu item appears if an
	optional duplex unit is installed.

Settings

69