
Attendance messages
Message | Meaning | Action |
Clean scanner glass | During a scanner calibration, the | Touch Cancel Job if a scan job is processing |
| firmware detects that the scanner | when the attendance message appears. This |
| ADF or flatbed glass may be dirty. | cancels the job and clears the message. |
|
| Touch Scan from Automatic Document Feeder |
|
| if the page jam recovery is active. Scanning |
|
| resumes from the ADF immediately after the |
|
| last successfully scanned page. |
|
| Touch Scan from flatbed if page jam recovery is |
|
| active. Scanning resumes from the flatbed |
|
| immediately after the last successfully scanned |
|
| page. |
|
| Touch Finish job without further scanning if |
|
| page jam recovery is active. The job ends at the |
|
| last successfully scanned page, but the job is |
|
| not canceled. Successfully scanned pages go |
|
| to their destination: copy, fax, |
|
| Touch Restart job if job recovery is active and |
|
| the job is restartable. The message clears. A |
|
| new scan job containing the same parameters |
|
| as the previous job starts. |
|
|
|
Close door or insert | The MFP detects that the upper front | • Close the upper front door. |
cartridge | door is open or a print cartridge is | • Install the print cartridge. |
| missing. |
|
|
|
|
Fax Memory Full | There is no memory to complete a fax | Touch Continue to clear the message. |
| job. Any attempted fax jobs are |
|
| canceled. |
|
|
|
|
If restarting job, | Page level recovery is active, and a | Touch Cancel Job if a scan job is processing |
replace originals that | page has scanned completely, but it | when the attendance message appears. This |
have not begun to exit | has not fully exited the ADF. | cancels the job and clears the message. |
the scanner. |
| Touch Scan from Automatic Document Feeder |
|
| |
|
| if the page jam recovery is active. Scanning |
|
| resumes from the ADF immediately after the |
|
| last successfully scanned page. |
|
| Touch Scan from flatbed if page jam recovery is |
|
| active. Scanning resumes from the flatbed |
|
| immediately after the last successfully scanned |
|
| page. |
|
| Touch Finish job without further scanning if |
|
| page jam recovery is active. The job ends at the |
|
| last successfully scanned page, but the job is |
|
| not canceled. Successfully scanned pages go |
|
| to their destination: copy, fax, |
|
| Touch Restart job if job recovery is active and |
|
| the job is restartable. The message clears. A |
|
| new scan job containing the same parameters |
|
| as the previous job starts. |
|
|
|
Insert tray [x] | Occurs when the MFP detects a | Insert the specified tray to clear the message. |
| missing tray. x can be 1, 2, 3, 4, or 5. | Touch Cancel Job to cancel the current job if |
|
| |
|
| needed. |
|
|
|
Install duplex | The MFP detects that the duplex unit | • Turn the MFP off, unplug the power cord from |
| is missing. This message occurs | the wall outlet, install the duplex unit, connect |
| when pages are formatted when the | the power cord to a properly grounded outlet, |
| duplex unit is present, but before the | and then restart the MFP. |
| pages are printed. Between the | • Touch Cancel Job to cancel the current job. |
| formatting and printing time, the |
|
| duplex unit is removed from the MFP. |
|
|
|
|
98