Lexmark 642e MFP manual But cannot be changed

Using MFP menus

Menu item	Purpose	Values and descriptions
PCL Emulation	Changes the point size for scalable	Point Size	Point size refers to the height of the
Settings	typographic fonts.	1.00–1008.00 (12*)	characters in the font. One point
			equals approximately 1/72 of an
			inch. Point sizes from 1 to 1008 in
			increments of 0.25 points can be
			selected.
			Note: Point Size only appears for
			typographic fonts.
	Specifies the font pitch for scalable	Pitch	Pitch refers to the number of fixed-
	monospaced fonts.	0.08–100.00 (10*)	space characters in a horizontal inch
			of type. A pitch from 0.08 to 100
			characters per inch (cpi) in
			increments of 0.01 cpi can be
			selected. For nonscalable
			monospaced fonts, the pitch appears
			but cannot be changed.
			Note: Pitch only appears for fixed, or
			monospaced, fonts.
	Determines how text and graphics	Orientation	Portrait prints text and graphics
	are oriented on the page.	Portrait*	parallel to the short edge of the
			paper.
		Landscape
			Landscape prints text and graphics
			parallel to the long edge of the paper.
			For more information about short and
			long edges, see Duplex Bind on
			page 70.
	Determines the number of lines that	Lines per Page	The MFP sets the amount of space
	print on each page.	1–255	between each line (vertical line
			spacing) based on the Lines per
		60* (US)
			Page, Paper Size, and Orientation
		64* (non-US)	menu items. Select the correct Paper
			Size and Orientation before changing
			Lines per Page.
	Sets the width of the logical page for	A4 Width	Note: The 203 mm setting makes
	A4-size paper.	198 mm*	the logical page wide enough to print
			eighty 10-pitch characters.
		203 mm
	Specifies whether the MFP	Auto CR after LF	Off—The MFP does not perform a
	automatically performs a carriage	Off*	carriage return after a line feed
	return (CR) after a line feed (LF)		control command.
		On
	control command.		On—The MFP performs a carriage
			return after a line feed control
			command.
	Specifies whether the printer	Auto LF after CR	Off—The MFP does not perform a
	automatically performs a line feed	Off*	line feed after a carriage return
	after a carriage return control		control command.
		On
	command.		On—The MFP performs a line feed
			after a carriage return control
			command.

Settings

77