Using MFP menus

Universal Setup

These menu items are used to specify the height and width of the Universal Paper Size. When the height and width for Universal Paper Size are specified, the MFP uses the Universal setting like other paper sizes, including support for duplex and n-up. For more information on n-up, see Multipage Print.

Menu item

Purpose

Values and descriptions

Units of Measure

Determines the unit of measure

Inches

Inches is the US default, and

 

used to enter the Universal Height

Millimeters

Millimeters is the international default.

 

and Width.

 

 

 

 

 

 

 

 

Portrait Width

Sets the portrait width of the

3–14.17 inches in

Shows either inches or millimeters

 

universal media.

0.01 inch increments

from the Units of Measure setting;

 

Note: If the value set exceeds the

76–360 mm in 1 mm

8.5 inches is the US default, and

 

216 mm is the international default.

 

maximum width, the MFP uses the

increments

 

 

 

maximum value allowed in inches or

 

 

 

millimeters.

 

 

 

 

 

 

Portrait Height

Sets the portrait height of the

3–14.17 inches in

Shows either inches or millimeters

 

universal media.

0.01 inch increments

from the Units of Measure setting;

 

Note: If the value set exceeds the

76–360 mm in 1 mm

14 inches is the US default, and

 

356 mm is the international default.

 

maximum height, the MFP uses the

increments

 

 

 

maximum value allowed in inches or

 

 

 

millimeters.

 

 

 

 

 

 

Feed Direction

Specifies the feed direction of the

Short Edge*

Feed Direction is only shown if the

 

Universal Paper Size.

Long Edge

Long Edge value is available. Long

 

 

Edge exists if the longest edge is

 

 

 

 

 

 

shorter than the maximum physical

 

 

 

width that the tray can accommodate.

 

 

 

See Duplex Bind on page 70 for

 

 

 

more information about short and long

 

 

 

edges.

 

 

 

 

Reports

Note: After a report prints, the MFP returns to the home screen.

Each report prints using some standard print settings, such as:

one copy

portrait orientation

600 dots per inch (dpi) print resolution

normal print area

no separator sheets

duplex printing is set off

multiple page printing is set off

toner darkness is set to eight

media source is the user default

Reports

26

Page 26
Image 26
Lexmark 642e MFP manual Reports, Universal Setup, See Duplex Bind on page 70 for