Lexmark 642e MFP manual Content menu item. For more information

Using MFP menus

Menu item	Purpose	Values and descriptions
Log Paper	Specifies the print media source	Tray 1*	Tray 1 (the standard tray) is the specified
Source	used to supply print media for the		print media source.
	MFP to print a log of all sent and
		Manual Feeder	The multipurpose feeder is the specified
	received FTPs. Envelopes do not
	apply.		print media source.
	Note: This menu item applies to all
		Tray <x>	x is one tray of Tray 2–Tray 5. Tray 2–Tray
	scan functions.
		(if one or more	5 are only listed as selections in the
			values list based on whether the same
		optional drawers
			number of optional drawers are installed.
		are installed)
			For example, if only two optional drawers
			are installed, Tray 2 and Tray 3 appear in
			the values list.
			Only one tray is the specified print media
			source.
FTP Bit Depth	Enables the Text/Photo mode to	1 bit*
	have smaller file sizes by using 1 bit	8 bit
	images when Color is set to Off.
Base file name		text entry	The default value is the following word:
			image
			Note: There is a 53-character limit for the
			base file name. The following characters
			or symbols are invalid:
			* – asterisk
			: – colon
			? – question mark
			< – less than symbol
			> – greater than symbol
			– vertical bar
			A time stamp is added to the end of the
			base file name.
Allow Save as	Allows saving of FTP addresses as	Yes*	When it is set to No, the Save as Shortcut
Shortcut	shortcuts.	No	button does not appear on the FTP
			Destination screen.
Background	Adjusts the amount of background	-4 to +4 (0*)	-4 sets Background Removal to off.
Removal	visible on a copy.		+4 sets Background Removal to the
			maximum allowed.
Contrast	Specifies the contrast used for the	0–5	Best for content has a default value, also,
	FTP job. The default is dependent	Best for content*	since the value is dependent on the
	on the Content menu item. If the		Content menu item. For more information,
	Content menu item is reset from the		see Content. If Content is mono text, the
	default setting, then the default for		Contrast default value is 5. The default is
	Contrast is reset, also.		0 for items other than mono text.
			Any reset of the Content value resets the
			default of the Best for content value.
Shadow Detail	Adjusts the amount of shadow detail	-4 to +4 (0*)	-4 preserves the least amount of shadow
	visible on a copy.		detail.
			+4 preserves the most shadow detail.
Scan edge to	Specifies if the original document is	Off*
edge	scanned edge-to-edge prior to	On
	sending the FTP job.

Settings

66