Lexmark 912 manual Short Paper, Res Save Off Deficient, Memory, Insufficient Collation, Area

Understanding printer messages

Message	What this message means	What you can do
34 Short Paper	The printer has determined that	•	Press Go to clear the message
	the length of the paper in the		and continue printing. The printer
	source specified on the second		does not automatically reprint the
	line of the display is too short to		page that prompted the message.
	print the formatted data.
		• Make sure the Paper Size setting
			in the Paper Menu is correct for
			the size paper you are using. If
			MP Feeder Size is set to
			Universal, make sure your paper
			is large enough for the formatted
			data.
		• Press Menu to open the Job Menu
			and cancel the current job.
		See also: Media guidelines
35 Res Save Off Deficient	The printer lacks the memory	•	Press Go to disable Resource
Memory	needed to enable Resource		Save and continue printing.
	Save. This message usually	• To enable Resource Save after
	indicates too much memory is
			you get this message:
	allocated for one or more of the
			– Make sure the link buffers are set to
	printer link buffers.
			Auto, and exit the menus to activate
			the link buffer changes.
			– When Ready is displayed, enable
			Resource Save from the Setup
			Menu.
		•	Install additional memory.
37 Insufficient Collation	The printer memory (or hard	•	Press Go to print the portion of the
Area	disk, if installed) does not have		job already stored and begin
	the free space necessary to		collating the rest of the job.
	collate the print job.	•	Press Menu to open the Job Menu
			and cancel the current job.
		See also: Canceling a print job
37 Insufficient Defrag	The printer cannot defragment	•	Delete fonts, macros, and other
Memory	flash memory, because the		data in printer memory.
	printer memory used to store	• Install additional printer memory.
	undeleted flash resources is full.

Understanding printer messages

104