Lexmark 912 manual Removing an optional drawer, Maintenance

Maintenance

4Tighten the eight screws.

5Connect the printer cables and power cord, and turn the printer on.

Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a non-ground fault interrupter (GFI) circuit.

Removing an optional drawer

1Turn the printer off.

2Unplug the power cord.

Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a non-ground fault interrupter (GFI) circuit.

3Disconnect the parallel or Ethernet cable from the printer.

If you have any other devices connected to the printer, turn them off and unplug any cables going to the printer.

CAUTION: This printer weighs 80.5 kg (177 Ib) and requires four people to lift. Anytime you move or lift the printer make sure you have enough people to help. Use the handholds located on the sides to lift.

4Lift the printer and move it away from the optional drawer.

CAUTION: An optional drawer weighs 18.5 kg (40.8 Ib.). Have someone help when lifting.

Removing an optional drawer

187