Lexmark 912 manual Understanding printer messages

Understanding printer messages

Message	What this message means	What you can do
58 Too Many	• Too many output bins are	Turn off and unplug the printer.
Bins Attached	installed.	Remove the additional output
	• An unsupported configuration	option(s). Plug in the printer and turn
		it on.
	of output bins is installed.
		Note: To prevent an electrical
		overload, plug your printer into a
		well-grounded outlet on a non-
		ground fault interrupter (GFI) circuit.
		See also: Setup Guide
58 Too Many Disks	Too many hard disks are	Turn off and unplug the printer.
Installed	installed on the printer. The	Remove the excess hard disks from
	printer only supports one hard	the printer. Plug in the printer and
	disk at a time.	turn it on.
		Note: To prevent an electrical
		overload, plug your printer into a
		well-grounded outlet on a non-
		ground fault interrupter (GFI) circuit.
58 Too Many Flash	Too many flash memory options	Turn off and unplug the printer.
Options	are installed on the printer.	Remove the excess flash memory.
		Plug in the printer and turn it on.
		Note: To prevent an electrical
		overload, plug your printer into a
		well-grounded outlet on a non-
		ground fault interrupter (GFI) circuit.
58 Too Many	Too many drawers with matching	Turn off and unplug the printer.
Trays Attached	trays are installed.	Remove the additional drawers. Plug
		in the printer and turn it on.
		Note: To prevent an electrical
		overload, plug your printer into a
		well-grounded outlet on a non-
		ground fault interrupter (GFI) circuit.
61 Defective Disk	The printer detects a defective	• Press Go to clear the message
	hard disk.	and continue printing.
		• Install a different hard disk before
		you perform any operations that
		require one.
		See also: Setup Guide
62 Disk Full	There is not enough memory on	• Press Go to clear the message
	the hard disk to store the data	and continue processing. Any
	sent to the printer.	information not previously stored
		on the hard disk is deleted.
		• Delete fonts, macros, and other
		data stored on the hard disk.

Understanding printer messages

108