Lexmark 912 Using printer menus, Setup Menu, Menu Item, Purpose, Values, Download, Target, Alarm

Using printer menus

Menu Item	Purpose	Values
Download	To specify the storage location for	RAM*	All downloaded resources are
Target	downloaded resources.		automatically stored in printer
	Storing downloaded resources in		memory (RAM).
	flash memory or on a hard disk is	Flash	All downloaded resources are
	permanent storage rather than the		automatically stored in flash
	temporary storage that RAM
			memory.
	provides. The resources remain in
	the flash memory or on the hard	Disk	All downloaded resources are
	disk even when the printer is		automatically stored on the hard
	turned off.		disk.
Hole Punch	To specify how the printer	Off*	Hole Punch Waste Full is
Alarm	responds when the hole punch box		displayed until someone empties
	becomes full.		the hole punch box. If an Auto
			Continue value is selected from
			the Setup Menu, the printer
			resumes printing after the
			specified timeout value.
		Single	Printer stops printing, displays
			Hole Punch Waste Full, and
			sounds three quick beeps.
		Continuous	Printer stops printing, displays
			Hole Punch Waste Full, and
			repeats three beeps every 10
			seconds until the hole punch box is
			emptied.
Jam	To establish whether the printer	On	Printer reprints jammed pages.
Recovery	reprints jammed pages.
		Off	Printer does not reprint jammed
			pages.
		Auto*	Printer reprints a jammed page
			unless the memory required to
			hold the page is needed for other
			printer tasks.
Job	To store statistical information	Off*	Printer does not store job statistics
Accounting	about your most recent print jobs		on disk.
	on the hard disk. The statistics
		On	Printer stores job statistics for the
	include whether the job printed
	with or without errors, the print		most recent print jobs.
	time, the job size (in bytes), the
	requested paper size and paper
	type, the total number of printed
	pages, and the number of copies
	requested.
	Note: Job Accounting is only
	displayed when a hard disk is
	installed, is neither defective nor
	Read/Write or Write protected, and
	Job Buffer Size is not set to 100%.

Setup Menu

84