Lexmark 912 Fuser?, Disabling Menus, Disk Corrupted, Reformat?, Disk Recovery, Yyy%, Enter PIN

Understanding printer messages

Message	What this message means	What you can do
Did You Replace	You have turned on the printer	• Press Select to reset the fuser
Fuser?	while the fuser is in the warning	maintenance counter.
	state and needs to be replaced.	• Press Stop to continue. The
		message continues to appear
		each time you turn the printer on
		while the fuser is in the warning
		state.
Disabling Menus	The printer is responding to a	• Wait for the message to clear.
	request to disable the menus.	• While the menus are disabled, you
		cannot change the printer settings
		from the operator panel.
		See also:
		Disabling operator panel menus
Disk Corrupted.	The printer has attempted a disk	• Press Go to reformat the disk and
Reformat?	recovery process and cannot	delete all files currently stored on
	repair the disk.	the disk.
		• Press Stop to clear the message
		without reformatting the disk. The
		printer may display Disk Recovery
		and attempt to recover the disk.
		See also:
		Disk Recovery x/5 yyy%
Disk Recovery	The printer is attempting to	Wait for the message to clear.
x/5 yyy%	recover the hard disk. Disk	Warning: Do not turn the printer off
	recovery takes place in five	while this message is displayed.
	phases; the second line on the
	operator panel display shows the
	percent complete of the current
	phase.
Enabling Menus	The printer is responding to a	Wait for the message to clear, and
	request to make the menus	then press Menu to view the menus
	available to all users.	from the operator panel.
Engine Warming	The printer is warming the fuser	Wait for the message to clear.
	assembly to prepare for printing.
Enter PIN:	The printer is waiting for you to	Use the operator panel buttons to
=___	enter your four-digit personal	enter the PIN you identified in the
	identification number (PIN).	driver when you sent the confidential
		job to the printer.
		See also:
		Using the Print and Hold function
Fax <x>	The printer is processing an	Wait for the message to clear.
	incoming fax.
Flushing Buffer	The printer is flushing corrupted	Wait for the message to clear.
	print data and discarding the
	current print job.

Understanding printer messages

96