Lexmark 912 manual Timeout, Printer, Usage, Resource, Save

Using printer menus

Menu Item	Purpose	Values
Print	To specify the amount of time (in	Disabled	The printer does not print the last
Timeout	seconds) the printer waits before		page of a print job until one of the
	printing the last page of a print job		following occurs:
	that does not end with a command		• The printer receives enough
	to print the page. The print timeout
			information to fill the page.
	counter does not start until
			• The printer receives a Form
	Waiting is displayed.
			Feed command.
			• You select Print Buffer from the
			Job Menu.
		1...255 (90*)	The printer prints the last page
			after the specified time. (Your
			printer may not support the entire
			range of values.)
Printer	To establish the default printer	PCL	PCL emulation, compatible with
Language	language used to communicate	Emulation	Hewlett-Packard printers.
	data from the computer to the
		PS	PostScript emulation, compatible
	printer.
	Note: Setting a printer language	Emulation*	with Adobe PostScript language.
	as the default does not prevent a
	software program from sending
	print jobs that use the other
	language.
Printer	To determine the behavior of the	Max Speed	The image transfer unit is engaged
Usage	image transfer unit during printing.		throughout the print job.
		Max Yield*	The image transfer unit position is
			engaged based on page content.
			This may extend the life of certain
			print supplies.
Resource	To determine what the printer does	Off*	Printer retains downloaded
Save	with downloaded resources, such		resources only until memory is
	as fonts and macros stored in		needed. It then deletes those
	RAM, if the printer receives a job		resources associated with the
	that requires more memory than is		inactive printer language.
	available.
		On	Printer retains all downloaded
			resources for all printer languages
			during language changes and
			printer resets. If the printer runs
			out of memory, 38 Memory Full
			is displayed.

Setup Menu

86