Lexmark 912 Network Menu, Using printer menus, Menu Item, Purpose, Values, Prime, Stapler, Buffer

		Using printer menus
Menu Item	Purpose		Values
Prime	The staple priming operation is mostly required when a user loads a new staple
Stapler	cartridge in the stapler device. However, this operation may also be required when a
	staple jam has occurred as part of the staple jam clearing procedure.
Reset Printer	To reset the printer to the user default value for each menu item, delete all downloaded
	resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete
	all data in the interface link buffer.
	Before selecting Reset Printer, exit the software program you are using.

Network Menu

Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network Opt <x>).

Note: Values marked by an asterisk (*) are the factory default settings.

Menu Item	Purpose	Values
Job	To temporarily store jobs on the	Off*	Does not buffer jobs to the hard
Buffering	printer hard disk before printing.		disk.
	Note: Changing this menu item	On	Buffers print jobs to the hard disk.
	automatically resets the printer.
		Auto	Buffers print jobs only if the printer
			is busy processing data from
			another input port.
MAC Binary	To configure the printer to process	On	Printer processes raw binary
PS	Macintosh binary PostScript print		PostScript print jobs from
	jobs.		computers using the Macintosh
			operating system.
			Note: This setting often causes
			Windows print jobs to fail.
		Off	Printer filters PostScript print jobs
			using standard protocol.
		Auto*	Printer processes print jobs from
			computers using either Windows
			or Macintosh operating systems.
Network	To configure the size of the	Auto*	Printer automatically calculates the
Buffer	network input buffer.		Network Buffer size
	Note: Changing the Network		(recommended setting).
	Buffer menu item automatically	3K to	User specifies the Network Buffer
	resets the printer.	maximum	size. The maximum size depends
		size allowed	on the amount of memory in your
			printer, the size of the other link
			buffers, and whether Resource
			Save is set to On or Off. To
			maximize the range for the
			Network Buffer size, disable or
			reduce the size of the parallel,
			serial, and USB buffers.

Network Menu

59