Using printer menus

Parallel Menu

Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel port (either Std Parallel or Parallel Opt <x>).

Note: Values marked by an asterisk (*) are the factory default settings.

Menu Item

Purpose

Values

 

Advanced

To enable bidirectional

Off

Disables parallel port negotiation.

Status

communication through the

 

 

On*

Enables bidirectional

 

parallel port.

 

 

 

communication through the

 

 

 

parallel interface.

 

 

 

 

Honor Init

To determine whether the printer

Off*

Printer does not honor hardware

 

honors hardware initialization

 

initialization requests from the

 

requests from the computer. The

 

computer.

 

computer requests initialization by

 

 

 

On

Printer honors hardware

 

activating the INIT signal on the

 

parallel interface. Many personal

 

initialization requests from the

 

computers activate the INIT signal

 

computer.

 

each time the computer is turned

 

 

 

on and off.

 

 

 

 

 

 

Job

To temporarily store jobs on the

Off*

Does not buffer print jobs to the

Buffering

printer hard disk before printing.

 

hard disk.

 

Note: Changing this menu item

On

Buffers print jobs to the hard disk.

 

automatically resets the printer.

 

 

 

 

Auto

Buffers print jobs only if the printer

 

 

 

 

 

is busy processing data from

 

 

 

another input port.

 

 

 

 

MAC Binary

To configure the printer to process

On

Printer processes raw binary

PS

Macintosh binary PostScript print

 

PostScript print jobs from

 

jobs.

 

computers using the Macintosh

 

 

 

operating system.

 

 

 

Note: This setting often causes

 

 

 

Windows print jobs to fail.

 

 

 

 

 

 

Off

Printer filters PostScript print jobs

 

 

 

using standard protocol.

 

 

 

 

 

 

Auto*

Printer processes print jobs from

 

 

 

computers using either Windows

 

 

 

or Macintosh operating systems.

 

 

 

 

NPA Mode

To specify whether the printer

On

Printer performs NPA processing.

 

performs the special processing

 

If data is not in NPA format, it is

 

required for bidirectional

 

rejected as bad data.

 

communication, following the

 

 

 

Off

Printer does not perform NPA

 

conventions defined in the

 

Network Printing Alliance (NPA)

 

processing.

 

Protocol.

 

 

 

Auto*

Printer examines data and

 

Note: Changing this menu item

 

 

determines the format and then

 

automatically resets the printer.

 

processes it appropriately.

 

 

 

 

Parallel Menu

61

Page 66
Image 66
Lexmark 912 manual Parallel Menu, Advanced, Status, Honor Init