Maintenance
Preparing for maintenance
1Turn the printer on.
2Follow the instructions in the table for the message your printer is displaying.
Primary message | Secondary message | What you should do | |
80 | Belt Life Warning | Select = Replace | Press Select if you want to |
|
| Go = Continue | replace the transfer belt now. |
|
| Press Go if you want to wait to | |
|
|
| |
|
|
| replace the transfer belt. |
|
|
|
|
80 | Belt Exhausted | Select = Replace | Press Select to replace the |
|
|
| transfer belt. |
|
|
|
|
80 | Fuser/Belt | Select = Replace | Press Select if you want to |
Life Warning | Go = Continue | replace the transfer belt now. | |
|
| Press Go if you want to wait to | |
|
|
| |
|
|
| replace the transfer belt. |
|
|
|
|
80 | Fuser/Belt Exhausted | Select = Replace | Press Select to replace the |
|
|
| transfer belt. |
|
|
|
|
The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items.
3Turn the printer off.
Removing the transfer belt
1Complete the steps in Preparing for maintenance.
2Make sure the printer is turned off.
Replacing the transfer belt
157
