Maintenance
If the message Did you replace Fuser? or Did you replace Belt? appears, press Go. Otherwise, use the following steps to reset the fuser or transfer belt counter.
Note: Although the fuser is shown, the same procedure is used to clear the transfer belt.
1Press Menu until SUPPLIES MENU appears on the second line of the display.
SUPPLIES MENU
1 Menu 2 | Select 3 Return 4 |
Go 5 | Stop 6 |
2Press Select to open the SUPPLIES MENU.
3Press Menu until REPLACE SUPPLIES appears on the second line of the display.
SUPPLIES MENU
REPLACE SUPPLIES
1 Menu 2 | Select 3 Return 4 |
Go 5 | Stop 6 |
4Press Select to open Replace Supplies.
Resetting the maintenance counter