No answer

A fax number is dialed, but no connection is made. Wait for the message to clear.

No dial tone

The printer does not have a dial tone. Wait for the message to clear.

No held jobs

Wait for the message to clear.

No jobs to cancel

Wait for the message to clear.

No recognized file types

Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.

Power Saver

The printer is saving power while it waits for the next print job.

Send a job to print.

Touch to warm the printer to normal operating temperature. Afterwards, Ready appears.

Printer locked, enter PIN to unlock

The control panel is locked. Enter the correct PIN to unlock it.

Printing

Wait for the message to clear.

Programming disk DO NOT POWER OFF

Wait for the message to clear.

Warning: Do not turn the printer power off while Programming disk appears on the display.

Programming flash DO NOT POWER OFF

Wait for the message to clear.

Warning: Do not turn the printer power off while Programming flash appears on the display.

Programming System Code DO NOT POWER OFF

Wait for the message to clear.

Warning: Do not turn the printer power off while Programming System Code appears on the display.

Queued for sending

The scanning process of a fax job completed, but the job is not sent yet because another fax job is being sent or received. Wait for the message to clear.

Reading USB drive DO NOT REMOVE

Wait for the message to clear.

194

Page 194
Image 194
Lexmark X945E, X940E manual No recognized file types Power Saver, 194